Two element cubicle quad Help

Author Post

Sun May 22 2016, 10:47AM
I am new to six metres , mostly Hf.
A few years ago i constructed the two element quad and even with the driven element i got contacts , very impressed !.
Only last year with the driven element propped against a brick wall i had contacts .
I am now wanting to improve the design but have read a lot on element spacing , reflector tuning stubs , 75 ohm 1/4 wave feed , driven element gamma matching , now i am a bit confused as to the best route to take .
If this works out i would like to have a go at a 4 element quad .
Going mobile / portable is also of interest also.

Many thanks

Malcolm Thomas
G0WXN


Back to top
Dai, G8FXM
Mon May 23 2016, 03:08PM
Webmaster

Registered Member #2
Joined: Mon Mar 17 2008, 06:10PM

Posts: 204
Hi Malcolm, this is an old article but might be of some use to you:

some more up to date data can be found here:

Back to top
g0wxn
Mon May 23 2016, 06:53PM
Registered Member #2480
Joined: Tue Jul 21 2015, 09:31AM

Posts: 2
Many thanks i will have a read.
Back to top